A car mount for fast mobile scanning with the GeoSLAM ZEB-Horizon
Capture large areas quickly and efficiently – With the help of the car mount you can install the GeoSLAM ZEB-Horizon on the vehicle roof and simply drive the route to be captured by car to scan the surroundings.
How is the car mount fixed to the car roof?
You attach the car mount quickly and securely to the flat vehicle roof using four suction cups (120mm diameter, load capacity 15kg per suction cup).
How is the GeoSLAM car mount designed?
The car mount is a construction of aluminium profiles. Despite its light weight, it has sufficient stiffness, so that the scanner only swings within a small acceptable range when driving.
The vertical profile can be adjusted in height. The scanner is reliably attached to it by means of an adapter board. All you need to do is screw an adapter board to the back of the scanner and then fix the scanner with the board to the profile using two screws. The second adapter board is screwed to the data logger and fastened to the rigid area of the roof mount. So the whole system of scanner and data logger can be used with the original cable from GeoSLAM without any extension.
Afterwards, you collect the data during the drive. The simultaneous use of the camera ZEB Cam is possible.
The manufacturer recommends to make the scan captures at speeds of maximum 30 kmph.
Developed and manufactured in Germany.
- Using the scanner with a vehicle
- Scanning of outdoor areas (e.g. facades, terrain)
- Scanning larger areas at high speed
- Scanning without leaving the vehicle
- Carrier with suction cups
- 2 adapter boards for ZEB-Horizon (for scanner and data logger)
- Adjustable height thanks to the adjustable middle profile and star knob screws
- Length: approx. 1.1m
- Width: approx. 0.35m
- Weight: approx. 9kg
Compatible laser scanner
- GeoSLAM ZEB-Horizon
- 1 profile tripod with built-in slot nuts for attaching the adapter board
- 1 middle profile with built-in slot nuts for attaching the adapter board
- 2 adapter boards for GeoSLAM ZEB-Horizon
- 4 countersunk screws M6
- 8 screws Torx-M3 12mm for ZEB-Horizon adapter board
- 4 star knob screws with 4 slot nuts
- 4 suction cups with 4 screws (M8, 120mm)
- 2 Allen keys
Synonyms: roof mount, vehicle mount, roof rack, scanner mount, car bracket, car rack, car tripod
|Product weight:||10,00 Kg|