EMLID Reach RS3 multi-band RTK GNSS receiver

EMLID Reach RS3 multi-band RTK GNSS receiver

Numéro d'article: 030-13198

2.249,00 €

hors 19% TVA ,

Vieux prix: 2.499,00 €

expédition à l'étranger peuvent être trouvés dans nos informations d'expédition." > Délai de livraison: 1 - 3 jours ouvrables (DE - Différent à l'étranger)

The Reach RS3 from Emlid makes GNSS surveying a walk in the park! The RTK GNSS receiver enables measurements with an accuracy of less than 20mm at an inclination of up to 60 degrees. The receiver is calibration-free and is ready to use right out of the box.

The Emlid Reach RS3 delivers centimeter-accurate results in approximately 5 seconds and maintains its performance even when the sky is partially obscured or the unit is tilted. The receiver is also resistant to magnetic interference, so metal objects and electronics will not affect accuracy.

With the Reach RS3, power is a guarantee! The industrial-grade battery lasts up to 22 hours when recording or 18 hours when used as an RTK rover with tilt compensation. For uninterrupted multi-day operation, simply connect a powerbank via USB-C.

The GNSS receiver with integrated LTE modem is easy to use and easy to mount on a GPS pole. Furthermore, it is resistant to shock, is dust and waterproof according to IP67 and can be used at a temperature of -20°C to 65°C.

Product characteristics

Tilt compensation: RTK + 2mm + 0.3mm/°
Average convergence time: ~5 s
Reaches different positioning providers (with update rates up to 10 Hz):
- GPS/QZSS L1C/A, L2C
- GLONASS L1OF, L2OF
- BeiDou B1I, B2I
- Galileo E1-B/C, E5b
IMU: 6DOF
Insensitive to magnetic interference
Fix solution in seconds
Post-processing through RINEX raw files (PPK)
Precise Point Positioning (PPP) – Precise measurements anywhere in the world
Global LTE modem (use with Nano SIM)
Battery life up to 22 h recording, 18 h as RTK rover with tilt correction
Lithium-ion battery 5200 mAh; 7.2 V; 37.44 Wh
Dual-band radio
- 868/915 MHz LoRa for receiving and transmitting corrections
- 450 MHz UHF for receiving corrections
Use as rover or base
LoRa up to 8km (long-range communication between base and rover)
Protocols:
- Corrections: NTRIP, RTCM3,
- Position output: NMEA, LLH/XYZ
- Dataprotocol: RINEX, NMEA, LLH/XYZ, UBX
IP67 proteced
Temperature resistant from -20°C to 65°C
Shock resistant cover
Dimensions: 126x126x142mm
Weight: 950g
Internal memory:16 GB
Accuracies:
- Static: H: 4 mm + 0,5 ppm | V: 8 mm + 1 ppm
- PPK: H: 5 mm + 0,5 ppm | V: 10 mm + 1 ppm
- RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm
The required Emlid Flow software can be downloaded for free from the App Store and Google Play.