EMLID Reach RS4 Pro Essential Kit

Número de artículo: 030-14051

Please note: The use of the UHF antenna (410–470 MHz) is subject to official approval or licensing in Germany and many other countries. The buyer is responsible for complying with the applicable national frequency regulations. Use without the required approval may be illegal.

4.420,00 €

excl. 19% IVA ,

Tiempo de entrega: 8 - 10 Los días laborables (DE - Desvío al extranjero)

Descripción
Video
Pregunta sobre el producto

This Essential Kit for the Reach RS4 Pro offers you a carefully compiled complete package to get the powerful GNSS receiver ready for immediate use. It contains all the important accessories you need for a smooth start in the field – from practical mounting solutions to connection and radio antennas to transport and storage options.

Whether you regularly work in the field, visit different measurement points, or are simply looking for a robust set for the daily requirements of your surveying and GIS projects, this kit simplifies setup, increases flexibility, and ensures that you can get started right away.

Product characteristics

EMLID Reach RS4 Pro

Tilt compensation: RTK + 2mm + 0.3mm/°
Average convergence time: ~5 s
Reaches various positioning providers (with update rates up to 10 Hz):
- GPS: L1C/A, L2C, L5
- GLONASS: L1OF, L2OF
- Galileo: E1-B/C, E5a, E6
- BeiDou: B1I, B1C, B2a, B3I
- QZSS: L1C/A, L1C/B11, L2C, L5
- NavIC: L1-SPS Data, L5-SPS
Insensitive to magnetic interference
Fixed solution in seconds
Post-processing using RINEX raw files (PPK)
Precise position data with signal error correction (RTK)
Precise Point Positioning (PPP) – Precise measurements anywhere in the world
Global LTE modem (for use with nano SIM)
Battery life up to 22 hours of recording, 18 hours as RTK rover with tilt correction
Lithium-ion battery 5000mAh; 7.2V; 36Wh
Dual-band radio:
- 868/915 MHz LoRa for receiving and sending corrections
- 450 MHz UHF for receiving corrections
Use as rover or base
LoRa up to 8km (long-range communication between base and rover)
Protocols:
- Corrections: NTRIP, RTCM3,
- Position output: NMEA, LLH/XYZ
- Data acquisition: RINEX, NMEA, LLH/XYZ, UBX
Imaging (RS4 Pro only):
- Image sensors: 1/2.6 in, CMOS, global shutter, Full HD
- Field of view: Upper camera: H: 64.6°, V: 42.8°
- Field of view: Lower camera: H: 63°, V: 42°
- Video frame rate: 25fps
IP68-protected
Temperature resistant from -40°C to 65°C
Shock-resistant casing
Dimensions: 128.6x128.6x99.3mm
Weight: 920g
Internal memory 16GB
Accuracies:
- Static: H: 4mm + 0.5ppm | V: 8mm + 1ppm
- PPK: H: 5mm + 0.5ppm | V: 10mm + 1ppm
- RTK: H: 7mm + 1ppm | V: 14mm + 1ppm

Required software

To operate the receiver, you need the Emlid Flow app. The app can be downloaded for free from the App Store and Google Play
If you need additional features, you can upgrade to Emlid Flow Pro.
re is a comparison of the two versions: Comparison
With the discount code V0F42XIFF1P, you can get the annual license at a discounted price.
Find out how the upgrade works here here.

Delivery content

Emlid Reach RS4 Pro Multi-Band RTK GNSS Receiver
Carrying case
USB-C charging cable
Long-range radio antenna 860-930 MHz
UHF antenna 410-470 MHz
Reach RS4 Pro shock absorber
Surveying pole with smartphone mount
Quick-release adapter

Please note: We can offer support for this product in German only. Please note: The use of the UHF antenna (410–470 MHz) is subject to official approval or licensing in Germany and many other countries. The buyer is responsible for complying with the applicable national frequency regulations. Use without the required approval may be illegal. (For all other countries: Please check whether a licence is required in your country.)