2-way telescope tripod for Leica RTC 360

Item number: 030-11901

Scanning 4m (157.5 in) above and 4.5m (177.2 in) below the surface

1.185,00 €

Excluding19% VAT. , plus shipping

Delivery status: 1-2 workdays

Shipping time: 1 - 2 workdays

unit


A tripod – flexible as never before: Raise your scanner into the upward or send it down a hole. The 2-way telescope tripod allows scanning in a height of 4.00m (157.5 in) and safe overhead scanning 4.50 m (177.2 in) below the earth' surface (manhole tripod / chamber tripod).

You can vary according to your measurement job:
To scan above ground, you install the support plate with the Leica GAD122 adapter at the top end of the main rod; you can securely attach the extension rods at the bottom end to crank the scanner higher.
To use the scanner upside down and scan below ground level, you attach the Leica RTC adapter to the lower end of the main rod and screw the extension rods to the upper end.
Additional extension rods are each securely connected to the previous rod element. This results in an almost infinitely extendable rod.

Developed and produced in Germany.


Designated use:

  • scanner usable over several heights . without assembly, disassembly and modification
  • enlargement of the possible scanner positions
  • safe overhead scanning

Product characteristics – 2-way telescope tripod:

  • tripod with 5/8" thread
  • indirect crank drive with enhanced gear unit
  • The crank drive can be operated by means of a hand crank or a screwdriver.
  • anti-twist geared column
  • additional leg braces for more stability
  • solid and quick locking mechanism
  • spirit level
  • set of shoes for tripod can be used on various surfaces
  • minimum effective depth: approx. -4.50m (177.2 in) underground
  • maximum useful height: approx. 4.00 m (157.5 in)
  • transport length: approx. 1.30m (51.2 in)
  • weight: approx.8.5kg
  • flat support plate with 110mm
  • During long-term usage, the scanner's weight should not be higher than 20kg.
  • 4 prolongation tubes (each 1m (39.4 in)) in a robust transport case included
  • suited for all scanners with 5/8" thread

Product characteristics – Leica adapter GAD122:

  • diameter: 104mm (4.09 in)
  • height: 17mm (0.67 in)
  • 5/8" female thread
  • 16mm (0.24 in) spigot, suitable for Leica RTC360
  • weight: 400g

Compatible laser scanners:

  • Leica RTC360

Delivery contents:

  • 1 aluminum telescope tripod with 5/8 inch
  • 4 prolongation tubes in a robust transport case
  • 1 crank for manual operation
  • 1 bit for comfortable handling of the tripod by means of a screwdriver
  • special screwdriver for securing the single tube
  • 1 Leica adapter GAD122

Optional delivery contents:

  • tripod dolly
  • prolongation tube
  • screwdriver


Synonyms: manhole tripod, chamber tripod, shaft tripod, telescope tripod


Product weight: 16,00 Kg
Contact
Question on item