EMLID Reach M+ UAV Mapping Kit

The Reach M+ UAV Mapping Kit is the ideal bundle for UAV surveys where images are georeferenced directly. This method makes ground control points necessary only for control; thus, the number of points is also minimized. Using the Reach RS+ as a Base station and the Reach M+ as a Rover on a camera UAV optimizes the accuracy of aerial surveys. This kit offers accuracies in the centimeter range and a range to the base station of up to 20km.

Product characteristics Reach RS+

• Control via smartphone app (iOS and Android), web interface or data collection apps
• Make WiFi and Bluetooth connections
• Supports multiple positioning providers (positioning rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 14 Hz (GPS only)):
  • GPS/QZSS: L1C/A
  • GPS/QZSS: L1C/AGLONASS: L10F
  • Galileo: E1
  • BeiDou (COMPASS): B1
  • SBAS
• Fix solution in seconds
• Post-processing through RINEX raw files (PPK)
• Battery life up to 30 hours (rechargeable via USB-C over mains or Powerbank)
• Export to various GIS or CAD software (formats: DXF, CSV, GeoJSON, ESRI, Shapefile)
• Positioning mode (import formats: CSV, DXF, GeoJSON)
• Position streaming in NMEA format
• Use as Rover or Base
• LoRa up to 8km (long range communication between Base and Rover)
• Maximum ranges to Base:
  • 10km in RTK
  • 20km in PPK
• Correction input and output via TCP, LoRa, Bluetooth, RS-232, NTRIP in RTCM3 format
• IP67 protected
• Temperature resistant from -20°C to 65°C
• Shock resistant case
• Dimensions: 145mm x 145mm x 85mm
• Weight: 0.69kg incl. internal battery
• Internal memory 8GB
• Accuracies:
  • Static: H: 5mm + 1ppm | V: 10mm + 2ppm
  • PPK: H: 7mm + 1ppm | V: 14mm + 2ppm
  • RTK: H: 7mm + 1ppm | V: 14mm + 2 ppm

Product characteristics Reach M+

• Control via smartphone app (iOS and Android) or web interface
• Receive various GNSS signals (72 channels in total):
  • GPS/QZSS L1
  • GLONASS G1
  • BeiDou B1
  • Galileo E1
  • SBAS
• 14 Hz* GPS / 5 Hz GNSS positioning rates (*with future firmware update)
• Internal memory: 8GB
• Input voltage on USB and JST GH 4.75V – 5.5V
• Antenna DC bias 3.3V
• Average consumption at 5V: 200mA
• Long-range radio connection with up to 8km range
• Working with long baselines possible:
  • RTK up to10km
  • PPK up to 20km
• Fix solution in about 1–2 min
• Dimensions: 56.4 x 45.3 x 14.6mm
• Weight: 20g
• Accuracies:
  • Static: H: 5mm + 1ppm | V: 10mm + 2ppm
  • Kinematic: H: 7mm + 1ppm | V: 14mm + 2ppm
• Corrections: NTRIP, RTCM3
• Position output: NMEA, LLH/XYZ

Delivery content

• Reach RS+
• Reach M+
• Tallysman GNSS Antenna
• Carrying case with strap
• LoRa Antenna
• Thread Adapter for survey pole
• 2x USB cable
• Charging cable USB to Micro-USB
• JST-GH 6-pin to Jumper Pin Cable
• JST-GH 5-pin to Jumper Pin Cable

Please note: We can offer support for this product in German only.