EMLID Reach M2 UAV Mapping Kit
The Reach M2 UAV Mapping Kit is the ideal bundle for very accurate UAV surveying, supported by georeferencing of the individual images. Using the Reach RS2+ as a Base station and the M2 as a Rover on a camera UAV, accuracy is optimized during aerial surveys. This kit offers both the highest ranges between Base station and Rover and the least loss of accuracy.
Product characteristics Reach RS2+
- Control via smartphone app (iOS and Android), web interface or data collection apps
- Make WiFi and Bluetooth connections
- Supports multiple positioning Providers (with update rates up to 10 Hz):
- GPS/QZSS L1C/A, L2C
- GLONASS L1OF, L2OF
- BeiDou B1I, B2I
- Galileo E1-B/C, E5b
- Fix solution in seconds
- Post-processing through RINEX raw files (PPK)
- Precise Point Positioning (PPP) – Precise measurements anywhere in the world
- Integrated 4G modem (use with Nano SIM)
- Battery life up to 22 hours (rechargeable via USB-C over mains or Powerbank)
- Export to various GIS or CAD software (formats: DXF, CSV, GeoJSON, ESRI, Shapefile)
- Positioning mode (import formats: CSV, DXF, GeoJSON)
- Position streaming in NMEA Format
- Use as Rover or Base
- LoRa up to 8km (long range communication between Base and Rover)
- Maximum ranges to Base:
- 60km in RTK
- 100km in PPK
- 8 through PPP
- Correction input and output via TCP, LoRa, Bluetooth, RS-232, NTRIP, VRS in RTCM3 Format
- IP67 protected
- Temperature resistant from -20°C to 65°C
- Shock resistant case
- Dimensions: 128mm x 142mm
- Weight: 950g
- Internal memory: 16 GB
- Accuracies:
- Static: H: 4mm + 0.5ppm | V: 8mm + 1ppm
- PPK: H: 5mm + 0.5ppm | V: 10mm + 1ppm
- RTK: H: 7mm + 1ppm | V: 14mm + 1ppm
Product characteristics Reach M2
- Control via smartphone app (iOS and Android) or web interface
- Receive various GNSS signals (184 channels in total):
- GPS/QZSS L1C/A, L2C
- GLONASS L1OF, L2OF
- BeiDou B1I, B2I
- Galileo E1-B/C, E5b
- 20 Hz* GPS / 10 Hz GNSS positioning rates (*with future firmware update)
- Internal memory: 16GB
- Input voltage on USB and JST GH 4.75V – 5.5V
- Antenna DC bias 3.3V
- Average consumption at 5V: 200mA
- Long-range radio connection with up to 8km range
- Working with long baselines possible:
- RTK up to 60km
- PPK up to 100 km
- Fix solution in about 5 seconds
- Dimensions: 56.4 x 45.3 x 14.6mm
- Weight: 20g
- Accuracies:
- Static: H: 4mm + 0.5ppm | V: 8mm + 1ppm
- Kinematic: H: 7mm + 1ppm | V: 14mm + 1ppm
- Corrections: NTRIP, RTCM3
- Position output: NMEA, LLH/XYZ
Delivery content
- Reach RS2+
- Reach M2
- Multi-band GNSS antenna
- Reach M+/M2 SMA antenna adapter cable 0.5m
- Hot shoe adapter for camera (optional)
- LoRa antenna
- Carrying case with a strap
- Charging cable USB-A to Micro-USB
- Micro USB cable
- JST-GH 6-pin to Jumper Pin Cable
- JST-GH 5-pin to Jumper Pin Cable
Please note: We can offer support for this product in German only.
Product weight: | 5,00 Kg |