EMLID Reach M2 Multi-band RTK GNSS module

EMLID Reach M2 Multi-band RTK GNSS module

Numéro d'article: 030-11954

649,00 €

hors 19% TVA ,

expédition à l'étranger peuvent être trouvés dans nos informations d'expédition." > Délai de livraison: 1 - 3 jours ouvrables (DE - Différent à l'étranger)

Reach M2 is a GNSS module specifically suited for the field of UAV surveying. The 20g lightweight module enables smooth stitching of your photogrammetric UAV imagery; moreover, fewer ground control points are required. The Reach M2, unlike its predecessor, can operate at larger baselines and on multiple frequencies.

The GNSS module eliminates delays in capturing images until GPS measurements are taken through the hot shoe, which connects directly to the trigger. Ground control points are only needed to verify accuracy. Like all other EMLID products, the M2 can be easily controlled via app. All logs and events are automatically recorded and can be easily downloaded afterwards.

Product characteristics

Control via smartphone app (iOS and Android) or web interface
Receive various GNSS signals (184 channels in total):
- GPS/QZSS L1C/A, L2C
- GLONASS L1OF, L2OF
- BeiDou B1I, B2I
- Galileo E1-B/C, E5b
20 Hz* GPS / 10 Hz GNSS positioning rates (*with future firmware update)
Internal memory: 16GB
Input voltage on USB and JST GH 4.75V – 5.5V
Antenna DC bias 3.3V
Average consumption at 5V: 200mA
Long-range radio connection with up to 8km range
Working with long baselines possible:
- RTK up to 60km
- PPK up to 100 km
Fix solution in about 5 seconds
Dimensions: 56.4 x 45.3 x 14.6mm
Weight: 20g
Accuracies:
- Static: H: 4mm + 0.5ppm | V: 8mm + 1ppm
- Kinematic: H: 7mm + 1ppm | V: 14mm + 1ppm
Corrections: NTRIP, RTCM3
Position output: NMEA, LLH/XYZ