EMLID Reach M2 Multi-band RTK GNSS module

Item number: 031-11954


499,00 €

Excluding19% VAT. , no shipping costs

Shipping time: 1 - 3 days

unit


Reach M2 is a GNSS module specifically suited for the field of UAV surveying. The 20g lightweight module enables smooth stitching of your photogrammetric UAV imagery; moreover, fewer ground control points are required. The Reach M2, unlike its predecessor, can operate at larger baselines and on multiple frequencies.

The GNSS module eliminates delays in capturing images until GPS measurements are taken through the hot shoe, which connects directly to the trigger. Ground control points are only needed to verify accuracy. Like all other EMLID products, the M2 can be easily controlled via app. All logs and events are automatically recorded and can be easily downloaded afterwards.

Product characteristics

  • Control via smartphone app (iOS and Android) or web interface
  • Receive various GNSS signals (184 channels in total):
    • GPS/QZSS L1C/A, L2C
    • GLONASS L1OF, L2OF
    • BeiDou B1I, B2I
    • Galileo E1-B/C, E5b
  • 20 Hz* GPS / 10 Hz GNSS positioning rates (*with future firmware update)
  • Internal memory: 16GB
  • Input voltage on USB and JST GH 4.75V – 5.5V
  • Antenna DC bias 3.3V
  • Average consumption at 5V: 200mA
  • Long-range radio connection with up to 8km range
  • Working with long baselines possible:
    • RTKup to60km
    • PPK up to 100km
  • Fix solution in about 5 seconds
  • Dimensions: 56.4 x 45.3 x 14.6mm
  • Weight:20g
  • Accuracies:
    • Static: H:4mm +0.5ppm| V:8mm +1ppm
    • Kinematic:H:7mm +1ppm | V: 14mm +1ppm
  • Corrections: NTRIP, RTCM3
  • Position output: NMEA, LLH/XYZ

Delivery content

  • Reach M2
  • Charging Cable USB-A to Micro-USB
  • JST-GH 6-pin to Jumper Pin Cable
  • JST-GH 5-pin to Jumper Pin Cable

Please note: We can offer support for this product in German only.


Product weight: 1,00 Kg
Contact
Question on item