The Reach RS3 from Emlid makes GNSS surveying a walk in the park! The RTK GNSS receiver enables measurements with an accuracy of less than 20mm at an inclination of up to 60 degrees. The receiver is calibration-free and is ready to use right out of the box.
The Emlid Reach RS3 delivers centimeter-accurate results in approximately 5 seconds and maintains its performance even when the sky is partially obscured or the unit is tilted. The receiver is also resistant to magnetic interference, so metal objects and electronics will not affect accuracy.
With the Reach RS3, power is a guarantee! The industrial-grade battery lasts up to 22 hours when recording or 18 hours when used as an RTK rover with tilt compensation. For uninterrupted multi-day operation, simply connect a powerbank via USB-C.
The GNSS receiver with integrated LTE modem is easy to use and easy to mount on a GPS pole. Furthermore, it is resistant to shock, is dust and waterproof according to IP67 and can be used at a temperature of -20°C to 65°C.
The survey kit includes two Reach RS3 receivers. These can then be used in parallel as a Rover or as a Rover and Base.
Product characteristics
- Tilt compensation: RTK + 2mm + 0.3mm/°
- Average convergence time: ~5 s
- Reaches different positioning providers (with update rates up to 10 Hz):
- GPS/QZSS L1C/A, L2C
- GLONASS L1OF, L2OF
- BeiDou B1I, B2I
- Galileo E1-B/C, E5b
- IMU: 6DOF
- Insensitive to magnetic interference
- Fix solution in seconds
- Post-processing through RINEX raw files (PPK)
- Precise Point Positioning (PPP) – Precise measurements anywhere in the world
- Global LTE modem (use with Nano SIM)
- Battery life up to 22 h recording, 18 h as RTK rover with tilt correction
- Lithium-ion battery 5200 mAh; 7.2 V; 37.44 Wh
- Dual-band radio
- 868/915 MHz LoRa for receiving and transmitting corrections
- 450 MHz UHF for receiving corrections
- Use as rover or base
- LoRa up to 8km (long-range communication between base and rover)
- Protocols:
- Corrections: NTRIP, RTCM3,
- Position output: NMEA, LLH/XYZ
- Dataprotocol: RINEX, NMEA, LLH/XYZ, UBX
- IP67 proteced
- Temperature resistant from -20°C to 65°C
- Shock resistant cover
- Dimensions: 126x126x142mm
- Weight: 950g
- Internal memory:16 GB
- Accuracies:
- Static: H: 4 mm + 0,5 ppm | V: 8 mm + 1 ppm
- PPK: H: 5 mm + 0,5 ppm | V: 10 mm + 1 ppm
- RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm
- The required Emlid Flow software can be downloaded for free from the App Store and Google Play.
If you need additional functions, you can purchase the annual license for EMLID Flow Survey from us.
Delivery content
- 2x Reach RS2+ Multi-band GNSS receiver
- 2x Carrying case with a strap
- 2x LoRa radio antenna
- 2x USB type-C cable
Please note: We can offer support for this product in German only.
