Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Emlid Reach RS4 Multi-Band RTK GNSS Receiver

Emlid Reach RS4 Multi-Band RTK GNSS Receiver

SKU: 030-14184

Korrekturdaten

from

3.299,00 €

excl. 19% VAT ,

Delivery time: 1 - 3 days (DE - int. shipments may differ)

unit

With the new Reach RS4 from Emlid, GNSS measurement is a breeze! The RTK GNSS receiver enables measurements with an accuracy of less than 20 mm at an inclination of up to 60 degrees. The receiver is calibration-free and ready to use right out of the box.
The Emlid Reach RS4 delivers centimetre-accurate results in approximately 5 seconds and maintains its performance even when the sky is partially obscured or when the device is tilted. The receiver is also immune to magnetic interference, so metal objects and electronics do not affect its accuracy.

A special highlight: the new magnesium housing not only makes the RS4 extremely robust, but also enables better signal processing in the event of reflections, for example when the receiver is located near a wall.

With the Reach RS4, performance is guaranteed! The industrial-grade battery lasts up to 22 hours when recording or 16 hours when used as an RTK rover with tilt compensation. For uninterrupted operation over several days, simply connect a power bank via USB-C.
The GNSS receiver with integrated LTE modem is easy to use and can be easily mounted on a GPS pole. It is also shock-resistant, dustproof and waterproof to IP68 and can be used at temperatures ranging from -40°C to 65°C.

Product characteristics

Tilt compensation: RTK + 2 mm + 0.3 mm/°
Average convergence time: ~5 s
Reaches various positioning providers (with update rates up to 10 Hz):◦GPS: L1C/A, L2C, L5
- GLONASS: L1OF, L2OF
- Galileo: E1-B/C, E5a, E6
- BeiDou: B1I, B1C, B2a, B3I
- QZSS: L1C/A, L1C/B11, L2C, L5
NavIC: L1-SPS Data, L5-SPS
Insensitive to magnetic interference
Fixed solution in seconds
Post-processing using RINEX raw files (PPK)
Precise position data with signal error correction (RTK)
Precise Point Positioning (PPP) – Precise measurements anywhere in the world
Global LTE modem (for use with nano SIM)
Battery life up to 22 hours of recording, 18 hours as RTK rover with tilt correction
Lithium-ion battery 5000 mAh; 7.2 V; 36 Wh
Dual-band radio:
- 868/915 MHz LoRa for receiving and sending corrections
- 450 MHz UHF for receiving corrections
Use as rover or base
LoRa up to 8 km (long-range communication between base and rover)
Protocols:
- Corrections: NTRIP, RTCM3,
- Position output: NMEA, LLH/XYZ
- Data acquisition: RINEX, NMEA, LLH/XYZ, UBX
IP68-protected
Temperature resistant from -40°C to 65°C
Shock-resistant casing
Dimensions: 128.6 x 128.6 x 99.3 mm
Weight: 920 g
Internal memory 16 GB
Accuracies:
- Static: H: 4 mm + 0.5 ppm | V: 8 mm + 1 ppm
- PPK: H: 5 mm + 0.5 ppm | V: 10 mm + 1 ppm
- RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm

Required software

To operate the receiver, you need the Emlid Flow app. The app can be downloaded for free from the App Store and Google Play
If you need additional features, you can upgrade to Emlid Flow Pro.
Here is a comparison of the two versions: Comparison
With the discount code V0F42XIFF1P, you can get the annual license at a discounted price.
Find out how the upgrade works here.

Delivery content

Reach RS4 multi-band RTK GNSS receiver
Carrying bag with shoulder strap
Long-range radio antenna 860-930 MHz
UHF-Antenna 410-470 MHz
USB-C charging cable

Please note: We can offer support for this product in German only. The use of the UHF antenna (410–470 MHz) is subject to official approval or licensing in Germany and many other countries. The buyer is responsible for complying with the applicable national frequency regulations. Use without the required approval may be illegal. (For all other countries: Please check whether a licence is required in your country.)