2-Way Telescope Tripod

Item number: 030-10321

The 2-way telescope tripod is the first tripod all over the world that enables both normal and overhead scanning.

1.099,00 €

Excluding19% VAT. , plus shipping

additonal 20,00 € Additional costs for excess length

Shipping time: 1 - 2 days


A tripod- flexible as never before: Raise your scanner into the upward or wind it down. The tripod allows not only scanning in a height of 4.00m (157.5 in), but also overhead scanning of shafts (manhole tripod / chamber tripod), for instance.

The main rod has a support plate with a 5/8 inch connection. Depending on the measuring task, the support plate can be connected upright or head first. Then, the 4 provided extension tubes are inserted at the further end and secured. Thus, you can crank your scanner upwards or downwards on and on.

The 3/8 inch adapter included in the delivery allows using the tripod with FARO Focus3D, Focus3D X, Focus Sand Trimble TX5.

For safe scanning overhead, we recommend the 3D safety adapter.

Developed and produced in Germany.

Designated use:

  • scanner usable over several heights- without assembly, disassembly and modification
  • enlargement of the possible scanner positions
  • overhead scanning

Product characteristics- 2-way telescope tripod:

  • tripod: 5/8 inch connection; adapter for 3/8 inch connection is included in the delivery
  • indirect crank drive with enhanced gear unit
  • The crank drive can be operated by means of a crank or a screwdriver.
  • anti-twist geared column
  • additional leg braces for more stability
  • solid and quick locking mechanism
  • spirit level
  • set of shoes for tripod can be used on various surfaces
  • minimum effective depth: approx. -4.50 m (177.2 in) below the earth's surface
  • maximum useful height: approx. 4.00 m (157.5 in)
  • transport length: approx. 1.30m (51.2 in)
  • weight: approx. 8,5 kg
  • flat support plate with 110 mm
  • During long-term usage, the scanner's weight should not be higher than 20kg.
  • 4 extension tubes (each 1m (39.4 in)) in a robust transport case included
  • suited for all scanners with 5/8" and 3/8" connection

Delivery contents:

  • 1 aluminum telescope tripod with 5/8 inch
  • 4 extension tubes in a robust transport case
  • 1 crank for manual operation
  • 1 bit for comfortable handling of the tripod by means of a screwdriver
  • special screwdriver for securing the single tubes
  • 1 3/8 inch adapter

Optional delivery contents:

  • tripod dolly
  • extension tube
  • screwdriver
  • 3D safety-adapter for overhead scanning

Synonym: manhole tripod, chamber tripod, shaft tripod

Product weight: 16,00 Kg
Question on item