EMLID Reach M+ RTK GNSS module

numero articolo: 031-11955

265,00 €

data di consegna: 1 - 3 giorni lavorativi

Reach M+ is a GNSS module specifically suited for the field of UAV surveying. Using the 20g lightweight module, you can easily stitch together your photogrammetric UAV imagery, with fewer ground control points required. The Reach M+, unlike the Reach M2, can only be operated with smaller baselines and fewer frequencies.

The GNSS module eliminates image capture delays until GPS measurement through the hot shoe, which connects directly to the trigger. Ground control points are now only required to verify accuracy. Like all other EMLID products, the M+ is easily controlled via an app. Recording of all logs and events is automatic; download is possible afterwards.

Product characteristics

  • Control via smartphone app (iOS and Android) or web interface
  • Receive various GNSS signals (72 channels in total):
    • GPS/QZSS L1
    • GLONASS G1
    • BeiDou B1
    • Galileo E1
    • SBAS
  • 14 Hz* GPS / 5 Hz GNSS positioning rates (*with future firmware update)
  • Internal memory: 8GB
  • Input voltage on USB and JST GH 4.75V – 5.5V
  • Antenna DC bias 3.3V
  • Average consumption at 5V: 200mA
  • Long-range radio connection with up to 8km range
  • Working with long baselines possible:
    • RTK up to10km
    • PPK up to 20km
  • Fix solution in about 1–2 min
  • Dimensions: 56.4 x 45.3 x 14.6mm
  • Weight: 20g
  • Accuracies:
    • Static: H: 5mm + 1ppm | V: 10mm + 2ppm
    • Kinematic: H: 7mm + 1ppm | V: 14mm + 2ppm
  • Corrections: NTRIP, RTCM3
  • Position output: NMEA, LLH/XYZ

Delivery content

  • Reach M+
  • Charging Cable USB-A to Micro-USB
  • Cable OTG to Micro-USB
  • JST-GH 6-pin to Jumper Pin Cable
  • JST-GH 5-pin to Jumper Pin Cable

Please note: We can offer support for this product in German only.

peso dell'articolo: 1,00 Kg
dati dei contatti
Domande sul prodotto